Smartcret
Mini Microcement Kit for Kitchens, Bathrooms and Showers - Covers 4 m² of Absorbent Surfaces
Mini Microcement Kit for Kitchens, Bathrooms and Showers - Covers 4 m² of Absorbent Surfaces
Who doesn't dream of a shower tray crafted with microcement? Or a microcement dining table for the kitchen? Effortlessly achieve sleek, low-maintenance surfaces with our Mini Kit designed specifically for kitchens, bathrooms and showers, capable of covering up to 4 m² of absorbent areas.
This kit is designed for anyone who wants to cover small areas, to give your bathroom or kitchen a little finesse.
Suitable for materials such as plaster, plasterboard or cement. Explore the diverse selection of colors and finishes available and kickstart your project today.
The colours shown and their NCS equivalents are indicative and have no contractual value. Please note that the calibration of your monitor may influence the colour perception, so there is a chance that it may not match after applying the product. The lighting in the space the application method and the type of tools used may also affect the final result.
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Application
Application of Mini Microcement Kit for Kitchens, Bathrooms and Showers - Covers 4 m² of Absorbent Surfaces
- Ensure the area is free of any cracks, grooves, or imperfections. After necessary repairs are made, ensure it's thoroughly clean and free of grease. Once completely dry, use masking tape to mark the boundaries of the treatment area.
- Prepare the surface for treatment. Apply a coat of Smart Primer ABS using a roller. Allow it to dry for 30 minutes.
- Time to apply the first layer of microcement. Using the Smart Roller, spread a thin layer (approximately 1 mm thick) of Smart Base microcement, starting with vertical strokes and then switching to horizontal. Then, use the polycarbonate trowel at a 45-degree angle to smooth the surface with arched and multi-directional movements until it's completely smooth. Allow it to dry for 6 hours and sand after each layer with the 40 grit sandpaper. Apply two layers in total.
- Continue the same process with Smart Liso, applying it with the Smart Roller and trowel in a thin layer (less than 0.5 mm thick) over the entire surface. Wait for 6 hours before sanding and applying a second layer. You need to sand with 220-grit sandpaper. Remove the masking tape and, as a recommendation, let the surface rest for 24 hours after the last application and sanding.
- Mix Smart Booster into the Smart Varnish container. Gently shake the container by hand for a few minutes. While the mixture rests, apply masking tape to any areas needing protection. Let the mixture sit for 5-10 minutes.
- Once the Smart Varnish mixture is ready, apply the first coat. The mixture has a shelf life of 24 hours, allowing it to be used for the second and third coats. Each coat should dry for 4 hours. Once the final coat is dry, remove the masking tape. Remember to sand the first and second coats with 400-grit sandpaper. The varnish requires a full 7 days to cure to achieve maximum performance.
*Important: the effective application of Smartcret microcement requires a 45º angle with the trowel. An incorrect angle may alter the texture and final aesthetics. The sandpaper grits in this microcement kit are intended for manual sanding. Using an electric sander may create excessive friction and compromise the result by burning the microcement.
Data Sheet
Mini Microcement Kit for Kitchens, Bathrooms and Showers Data Sheets - Covers 4 m² of Absorbent Surfaces
Want to learn more about all the products included in the Mini Microcement Kit for kitchens, bathrooms and showers, covering 4 m² of absorbent surfaces? Here are the technical data sheets for each of them:
Specification sheet Smart Jointer
Specification sheet Smart Base & Liso