Smartcret
Mini Microcement Kit for Kitchens, Bathrooms and Showers - Covers 4 m² of Non-Absorbent Surfaces
Mini Microcement Kit for Kitchens, Bathrooms and Showers - Covers 4 m² of Non-Absorbent Surfaces
Do you want to bring a touch of sophistication into your kitchen or bathroom? Then, with our ready-to-use microcement kit for kitchens, bathrooms and showers to cover up to 4 m² of non-absorbent surfaces you can bring a refined edge into your home.
Line your tiled shower tray with microcement or cover your kitchen backsplash. With microcement details, you'll upscale your kitchen or bathroom in a second.
Suitable for materials such as marble, terrazzo or tiles. Choose from our wide range of colours and finishes and get started.
The colours shown and their NCS equivalents are indicative and have no contractual value. Please note that the calibration of your monitor may influence the colour perception, so there is a chance that it may not match after applying the product. The lighting in the space the application method and the type of tools used may also affect the final result.
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Application
Application of the Mini Microcement Kit for 4 m² of Non-Absorbent Surfaces
- Clean and degrease the surface. Once dry, tape off the area where the microcement will be applied.
- Apply 1 layer of Smart Jointer to fill the grout joints and leave the surface seamless. Let the product dry for 24 hours. Then, sand with a 40-grit sandpaper until the surface is completely smooth.
- Prepare the surface for treatment. Use a roller to apply a coat of Smart Primer PLUS. Let it dry for 30 minutes.
- Wet the Smart Roller with Smart Base and spread the microcement thinly (less than 1 mm) vertically and then horizontally over the surface. Smooth it out with the polycarbonate trowel in arching and multi-directional movements. Repeat this process until the surface is completely covered and smooth. Allow 6 hours of drying time between layers and sand after each layer with a 40-grit sandpaper to ensure there are no burrs. Apply a total of 2 layers of Smart Base.
- Repeat the same process with Smart Liso. Use the Smart Roller and polycarbonate trowel to spread the microcement thinly (less than 0.5 mm) until the surface is covered. Allow 6 hours of drying time between layers and sand after each layer with a 220-grit sandpaper. Remove the tape after application. Apply a total of 2 layers of Smart Liso. Let it dry for 24 hours after the last layer.
- Add the Smart Booster to the Smart Varnish container. Gently shake the container manually for a few minutes. While the mixture rests, apply tape to the necessary areas. Let the mixture sit for 5-10 minutes.
- Once the Smart Varnish mixture is ready, apply the first coat. The mixture has a shelf life of 24 hours, allowing it to be used for the second and third coats. Each coat should dry for 4 hours. Once the final coat is dry, remove the tape. Remember to sand the first and second coats with a 400-grit sandpaper. The total curing time for the varnish is 7 days to achieve maximum performance.
*Important: maintaining a 45º angle with the trowel is key in the application of Smartcret microcement. Otherwise, the final result may not be as expected. It is important to keep in mind that the sandpapers included in the kit are designed for manual sanding. If an electric sander is used, it is quite likely that the material will be damaged due to excessive pressure.
Data Sheet
Mini Microcement Kit for Kitchens, Bathrooms and Showers Data Sheets - Covers 4 m² of Non-Absorbent Surfaces
Want to learn more about all the products included in the Mini Microcement Kit for kitchens, bathrooms and showers, covering 4 m² of non-absorbent surfaces? Here are the technical data sheets for each of them: