Smartcret
Mini Microcement Kit for Walls - Covers 6 m²
Mini Microcement Kit for Walls - Covers 6 m²
With our Mini Microcement Kit for walls, you can completely revamp a room by cladding an accent wall with microcement completely by yourself.
A quick and easy way to transform a room by covering a small vertical area of up to 6 m² and making it into a more durable, easier to clean, and modern wall.
So, do you want to make a wall the focal point in your living room or bedroom? Is it made of plaster, drywall or cement? Then, go ahead and give it a try!
The colours shown and their NCS equivalents are indicative and have no contractual value. Please note that the calibration of your monitor may influence the colour perception, so there is a chance that it may not match after applying the product. The lighting in the space the application method and the type of tools used may also affect the final result.
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Application
Application of the Mini Microcement Kit for Walls - Covers 6 m²
- Ensure the area is free from cracks, dents, or similar imperfections. Once checked and/or repaired if necessary, make sure it is clean and grease-free. When completely dry, it is advisable to mark the boundaries of the area to be treated with masking tape.
- Prepare the surface for treatment. Use a roller to apply a layer of Smart Primer ABS, making sure to shake the product before use. Let it dry for 30 minutes.
- Application of microcement. Spread a thin layer of Smart Liso (less than 0.5 mm) over the entire surface with the Smart Roller, starting vertically first and then horizontally. Next, use the trowel at a 45º angle to smooth the surface with arcing movements in various directions until it is completely smooth. Allow each layer to dry for at least 6 hours and sand with 220-grit sandpaper after each layer has dried. Apply a total of 3 layers of Smart Liso. Finally, carefully remove the masking tape and we recommend letting the surface rest for 24 hours after the last application for best results.
- Reapply the masking tape and apply 3 layers of Smart Varnish with a roller. Remove the masking tape immediately after application or after it is completely dry. Allow 4 hours of drying time between layers. Sand the first and second layers with 400 grit sandpaper. Finally, to ensure perfect curing, let it dry for 7 days.
*Important: to apply Smartcret microcement correctly, the trowel must be kept at a 45º angle. If not, the final finish may differ from the desired result. For a proper application process, we recommend manual sanding only. The sandpaper grits are designed for this purpose. Using an electric sander carries the risk of generating excessive friction and burning the microcement.
Data Sheet
Technical Data Sheets for Mini Microcement Kit for Walls - Covers 6 m²
Do you want to know more about all the products included in the Mini Microcement Kit for walls that covers 6 m²? Here are the technical data sheets for each of them:
Specification sheet Smart Liso