Smartcret
Smart Microcement Kit for Kitchens, Bathrooms and Showers - Covers 8 m² of Absorbent Surfaces
Smart Microcement Kit for Kitchens, Bathrooms and Showers - Covers 8 m² of Absorbent Surfaces
Looking to jazz up your shower with a modern twist? Or make your kitchen walls a breeze to clean? Our Smart Microcement Kit for bathrooms, showers, and kitchens has got you covered, tackling up to 8 m² of absorbent surfaces with ease.
Whether you fancy a sleek microcement shower or want to give your kitchen walls a fresh facelift without the hassle of removing old materials, our kit brings the latest trendy style right to your home.
Perfect for cement, plaster, and plasterboard surfaces, you can pick from a range of shades and choose between a matte or satin finish. Get started on your renovation adventure—no heavy construction required!
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Application
Smart Microcement Kit for Kitchens, Bathrooms and Application of Smart Microcement Kit for Kitchens, Bathrooms and Showers - Covers 8 m² of absorbent surfaces
- Ensure the area is free of any cracks, grooves, or imperfections. After necessary repairs are made, ensure it's thoroughly clean and free of grease. Once completely dry, use masking tape to mark the boundaries of the treatment area.
- Prepare the surface for treatment. Apply a coat of Smart Primer ABS using a roller. Allow it to dry for 30 minutes.
- Time to apply the first layer of microcement. Using the Smart Roller, spread a thin layer (approximately 1 mm thick) of Smart Base microcement, starting with vertical strokes and then switching to horizontal. Then, use the polycarbonate trowel at a 45-degree angle to smooth the surface with arched and multi-directional movements until it's completely smooth. Allow it to dry for 6 hours and sand after each layer with the 40 grit sandpaper. Apply two layers in total.
- Continue the same process with Smart Liso, applying it with the Smart Roller and trowel in a thin layer (less than 0.5 mm thick) over the entire surface. Wait for 6 hours before sanding and applying a second layer. You need to sand with 220-grit sandpaper. Remove the masking tape and, as a recommendation, let the surface rest for 24 hours after the last application and sanding.
- Mix Smart Booster into the Smart Varnish container. Gently shake the container by hand for a few minutes. While the mixture rests, apply masking tape to any areas needing protection. Let the mixture sit for 5-10 minutes.
- Once the Smart Varnish mixture is ready, apply the first coat. The mixture has a shelf life of 24 hours, allowing it to be used for the second and third coats. Each coat should dry for 4 hours. Once the final coat is dry, remove the masking tape. Remember to sand the first and second coats with 400-grit sandpaper. The varnish requires a full 7 days to cure to achieve maximum performance.
Data Sheet
Smart Microcement Kit for Kitchens, Bathrooms and Showers Data Sheets - Covers 8 m² of absorbent surfaces
Want to learn more about all the products included in the Smart Microcement Kit for kitchens, bathrooms and showers, covering 8 m² of absorbent surfaces? Here are the technical data sheets for each of them:
Specification sheet Smart Jointer
Specification sheet Smart Base & Liso
Specification sheet Smart Primer ABS
Specification sheet Smart Varnish
*Important: to achieve the best result, the trowel must be kept at a 45º angle, as already specified. If this inclination is not maintained, the final finish may be compromised. This 8m² microcement kit includes sandpapers suitable only for manual sanding. Using an electric sander carries the risk of burning the microcement due to excessive friction.