Smartcret
Smart Liso: Finishing ready-to-use microcement
Smart Liso: Finishing ready-to-use microcement
Say goodbye to your antique tiles and old-fashioned marble, or your outdated plaster and plasterboard. With Smart Liso, the ready-to-use pigmented finishing microcement, you will put the icing on the cake for your hassle-free renovation.
It's the second step of the Smartcret microcement application, with which you'll become a true do-it-yourself expert. You don't need to have previous experience! It's that easy to apply.
The colours shown and their NCS equivalents are indicative and have no contractual value. Please note that the calibration of your monitor may influence the colour perception, so there is a chance that it may not match after applying the product. The lighting in the space the application method and the type of tools used may also affect the final result.
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Additional information
Additional information on Smart Liso: Finishing ready-to-use microcement
All additional technical information about the ready-to-use microcement for the finishing and already pigmented Smart Liso and its application:
- Appearance: Paste
- Grain size: 0.125 mm
- Density: 1.63 g/cm3
- Consumption per layer: 0.250 kg/m2
- Maximum layer thickness: 0.3 mm
- Taber Abrasion: 42 mg
- Shore D Hardness: 45
Properties
Benefits of Smart Liso: Finishing ready-to-use microcement
- Simple and fast application.
- Fast drying, only 6 hours between layers.
- Compatible with many surfaces, high adherence.
- Very flexible product that does not crack.
- Good resistance to abrasion.
- Easy maintenance and cleaning.
- Environmentally friendly composition.
- Scratch resistance.
- Low grain size.
Application
Application of Smart Liso: Finishing ready-to-use microcement
The ready-to-use microcement for finishing, Smart Liso, is the second application step in the Smartcret Do It YOURSELF system. Once the installation and drying of Smart Base, the preparation microcement, are complete, apply protective adhesive tape again to outline the area.
- Stir the pre-pigmented ready-to-use finishing microcement Smart Liso with a spatula. Dip the black roller into the Smart Liso and spread the microcement thinly (less than 0.5mm) on the wall vertically, then horizontally. Smooth it out with the polycarbonate trowel using arcing motions in all directions. Continue this process until the surface is completely covered and smooth. Allow 6 hours of drying time between layers and sand after each layer using a 220-grit sandpaper. Apply a total of 2 layers of Smart Liso.
- After 24 hours from the application of the last layer of Smart Liso microcement, protect the new surface with water-based polyurethane sealer, Smart Varnish. Apply 3 coats, 4 in bathrooms and high-traffic floors, leaving 4 hours between each. Sand the first and second coat with 400-grit sandpaper.
Our sealer reaches maximum resistance after seven days. We recommend respecting this period to enjoy your new microcement coating.