Smartcret
Super Microcement Kit for Kitchens, Bathrooms and Showers - Covers 16 m² of Absorbent Surfaces
Super Microcement Kit for Kitchens, Bathrooms and Showers - Covers 16 m² of Absorbent Surfaces
Are you tired of the paint peeling off your walls in the bathroom or kitchen? Do you want a more durable material that withstands steam and water? Look no further, with our Super Microcement Kit for kitchens, bathrooms and showers that covers up to 16 m² of absorbent surfaces, flakey paint will be a thing of the past.
Our pigmented microcement, which comes in a huge range of colours, will provide you with the dream look for your home, just pick between a matte or satin finish and presto bango - your microcement dream walls are a reality.
The colours shown and their NCS equivalents are indicative and have no contractual value. Please note that the calibration of your monitor may influence the colour perception, so there is a chance that it may not match after applying the product. The lighting in the space the application method and the type of tools used may also affect the final result.
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Application
Application of Super Microcement Kit for Kitchens, Bathrooms and Showers - Covers 16 m² of Absorbent Surfaces
- Ensure the area is free of any cracks, grooves, or imperfections. After necessary repairs are made, ensure it's thoroughly clean and free of grease. Once completely dry, use masking tape to mark the boundaries of the treatment area.
- Prepare the surface for treatment. Apply a coat of Smart Primer ABS using a roller. Allow it to dry for 30 minutes.
- Time to apply the first layer of microcement. Using the Smart Roller, spread a thin layer (approximately 1 mm thick) of Smart Base microcement, starting with vertical strokes and then switching to horizontal. Then, use the polycarbonate trowel at a 45-degree angle to smooth the surface with arched and multi-directional movements until it's completely smooth. Allow it to dry for 6 hours and sand after each layer with the 40 grit sandpaper. Apply two layers in total.
- Continue the same process with Smart Liso, applying it with the Smart Roller and trowel in a thin layer (less than 0.5 mm thick) over the entire surface. Wait for 6 hours before sanding and applying a second layer. You need to sand with 220-grit sandpaper. Remove the masking tape and, as a recommendation, let the surface rest for 24 hours after the last application and sanding.
- Mix Smart Booster into the Smart Varnish container. Gently shake the container by hand for a few minutes. While the mixture rests, apply masking tape to any areas needing protection. Let the mixture sit for 5-10 minutes.
- Once the Smart Varnish mixture is ready, apply the first coat. The mixture has a shelf life of 24 hours, allowing it to be used for the second and third coats. Each coat should dry for 4 hours. Once the final coat is dry, remove the masking tape. Remember to sand the first and second coats with 400-grit sandpaper. The varnish requires a full 7 days to cure to achieve maximum performance.
*Important: the sandpaper grits specified in this step-by-step guide are for manual sanding.
Data Sheet
Super Microcement Kit for Kitchens, Bathrooms and Showers Data Sheets - Covers 16 m² of Absorbent Surfaces
Want to learn more about all the products included in the Super Microcement Kit for kitchens, bathrooms and showers, covering 16 m² of absorbent surfaces? Here are the technical data sheets for each of them:
Specification sheet Smart Jointer
Specification sheet Smart Base & Liso