Smartcret
Super Microcement Kit for Kitchens, Bathrooms and Showers - Covers 16 m² of Non-Absorbent surfaces
Super Microcement Kit for Kitchens, Bathrooms and Showers - Covers 16 m² of Non-Absorbent surfaces
Having a microcement bathroom or kitchen will make you the envy of the neighborhood. Say goodbye to retro tiles and cover them without the hassle of removing them with our Super Microcement Kit for kitchens, bathrooms and showers, which covers up to 16 m² of non-absorbent surfaces for a seamless look.
For a stylish and modern makeover, clad your walls with microcement. If you have a small bathroom or kitchen, cover it from base to ceiling for a continuous, seamless surface.
Our kit can cover marble, tiles, and any other surface with seams. Just choose your matte or satin finish from our color collection and transform your space today!
Couldn't load pickup availability
* Our delivery times to the UK are two weeks (15 days) from the time the order is paid for. This period may vary depending on the customs clearance process. A process outside Smartcret's control. Our delivery times to the US are two weeks (15 days) from the time the order is paid for. (Air shipment to the US)
Share
Collapsible content
Description
Application
Application of Super Microcement Kit for Kitchens, Bathrooms and Showers - Covers 16 m² of Non-Absorbent Surfaces
- Clean and degrease the surface. Once dry, tape off the area where the microcement will be applied.
- Apply 1 layer of Smart Jointer to fill the grout joints and leave the surface seamless. Let the product dry for 24 hours. Then, sand with a 40-grit sandpaper until the surface is completely smooth.
- Prepare the surface for treatment. Use a roller to apply a coat of Smart Primer PLUS. Let it dry for 30 minutes.
- Wet the Smart Roller with Smart Base and spread the microcement thinly (less than 1 mm) vertically and then horizontally over the surface. Smooth it out with the polycarbonate trowel in arching and multi-directional movements. Repeat this process until the surface is completely covered and smooth. Allow 6 hours of drying time between layers and sand after each layer with a 40-grit sandpaper to ensure there are no burrs. Apply a total of 2 layers of Smart Base.
- Repeat the same process with Smart Liso. Use the Smart Roller and polycarbonate trowel to spread the microcement thinly (less than 0.5 mm) until the surface is covered. Allow 6 hours of drying time between layers and sand after each layer with a 220-grit sandpaper. Remove the tape after application. Apply a total of 2 layers of Smart Liso. Let it dry for 24 hours after the last layer.
- Add the Smart Booster to the Smart Varnish container. Gently shake the container manually for a few minutes. While the mixture rests, apply tape to the necessary areas. Let the mixture sit for 5-10 minutes.
- Once the Smart Varnish mixture is ready, apply the first coat. The mixture has a shelf life of 24 hours, allowing it to be used for the second and third coats. Each coat should dry for 4 hours. Once the final coat is dry, remove the tape. Remember to sand the first and second coats with a 400-grit sandpaper. The total curing time for the varnish is 7 days to achieve maximum performance.
*Important: to apply Smartcret microcement correctly, you must maintain a 45º angle with the trowel. Failing to do so may result in a finish that differs from the desired one. Additionally, the sandpaper grits specified in this application process and included in the kit are intended solely for manual sanding. Using an electric sander may burn the product due to excessive pressure.
Data Sheet
Super Microcement Kit for Kitchens, Bathrooms and Showers Data Sheets - Covers 16 m² of Non-Absorbent Surfaces
Want to learn more about all the products included in the Super Microcement Kit for kitchens, bathrooms and showers, covering 16 m² of non-absorbent surfaces? Here are the technical data sheets for each of them:
Specification sheet Smart Jointer
Specification sheet Smart Base & Liso